Worldlink IndustrialFocus on electronic cables and cables

0755-23426156
CN

NewsNews

Position:HomeNewsIndustry News

What are the misconceptions in installing household electrical wires?

2022-10-25(2778)Views

Water and electricity engineering is the most worrisome aspect of renovating a new house, especially electrical wiring. Nowadays, there are many household appliances with high power. If there are any problems with the quality or installation of electrical wiring, a small piece of electrical wiring can instantly become a killer of family safety. So, let me tell you what are the misconceptions in installing electrical wiring for household appliances! Mistake 1: Strong and weak electricity co management is commonly used in Chinese households. Some construction teams, in order to facilitate construction, directly store all electrical wires together, including power cables, network cables, telephone cables, etc. This can cause interference between lines, leading to unstable signals. It can also become a hidden danger in home fires. Strong and weak currents should be routed separately, and it is strictly prohibited for strong and weak currents to share a single tube or bottom box. Myth 2: Repeated wiring. Some construction workers try to make the pipeline look better


Water and electricity engineering is the most worrisome aspect of renovating a new house, especially electrical wiring. Nowadays, there are many household appliances with high power. If there are any problems with the quality or installation of electrical wiring, a small piece of electrical wiring can instantly become a killer of family safety. So, let me tell you what are the misconceptions in installing electrical wiring for household appliances!

Mistake 1: Strong and weak current co management

AC power is commonly used in Chinese households. Some construction teams, for the convenience of construction, directly store all electrical wires together, such as power cables, network cables, telephone cables, etc. This can cause interference between lines, leading to unstable signals. It can also become a hidden danger in home fires. Strong and weak currents should be routed separately, and it is strictly prohibited for strong and weak currents to share a single tube or bottom box.

Myth 2: Repeated wiring

Some construction workers use a pipeline for each wire to make the pipeline look clearer, which results in many pipes buried inside the wall. When repairing in the future, it is difficult to locate the location of the problem pipeline, or most of the structure between the wall and ground must be damaged in order to find the problem point. Generally speaking, the line should be made into a "live line", and wires in the same direction should be placed in a single pipe without exceeding 40% of the pipeline capacity. This is both economical and avoids the trouble of future maintenance.



Mistake 3: Directly burying wires without casing

Some irresponsible construction companies bury wires directly into the wall during construction, but the wires are not properly insulated and the wire joints are exposed, which can easily cause safety hazards and is a typical phenomenon of cutting corners. In future life, wires lack protection and are prone to being bitten by mice or external damage, leading to short circuits in the wires. The laying standards for wires are clear, and there must be insulation sleeves outside the wires for protection, and the joints cannot be exposed. Therefore, everyone must pay attention during the construction process.

Myth 4: Arbitrary installation of socket wires

The power wire must use a copper wire cross-section. If you live in an old house, you must replace the original aluminum wire with copper wire. Because aluminum wires are prone to oxidation, the joints are prone to sparking. In addition, many families adopt the method of slotting, burying wires, and laying concealed pipes for the sake of aesthetics. When wiring, it is necessary to follow the principle of "live wire enters the switch, zero wire enters the lamp head", and leakage protection devices should be installed on the sockets.

Latest news

  • Is PVC fence cheap?

    Is PVC fence cheap?PVC enclosure is one of the most commonly used types of enclosure in construction. The main purpose of PVC enclosure is to isolate the construction site from the external road envir……

  • Unqualified wires and cables pose a significant risk. Are you still using them

    Wire and cable are a large category of electrical products used for transmitting power, information, and electromagnetic energy conversion. During the random inspection process, a large number of subs……

  • The fake wires are disguised so realistically! How to identify?

    Fake and inferior wires can cause electrical circuit damage, leakage, fire, and other adverse phenomena. Oh my god! The fake wires are disguised so realistically! How to identify? 1、 Fire. Fake wires ……

  • How to choose household wires?

    Although wires are small, they have a significant responsibility. They are an indispensable basic building material in home decoration, and the quality of wires directly affects the circuit safety of ……

180 2537 7520

Mobile phone:139 252 05385

Telephone:0755-23426156

Facsimile:0755-29940658

Mailbox:szdy668@126.com

Address:Hongfengtai Science and Technology Park, Mashantou Third Industrial Zone, Gongming, Shenzhen